Home > News > Content
Production Principle Of Ceramic Fiber Board
Oct 24, 2018

The jet fiber (short fiber, fine fiber, easy to break and mix) is used as the raw material of ceramic fiberboard, and a certain proportion of binder and filler-grade additives are added. After beating machine, the pulp is fully dispersed in the pulping tank. Pump into the forming tank and mix with compressed air. The mould is put into the forming tank, and the fiber slurry is adsorbed on the mould by the principle of vacuum pumping. Accurate control of adsorption time, wet fiber material vacuum dehydration, demoulding, put in the tray drier drying for 10-24 hours. After drying, the fiberboard is precisely controlled by the special grinding machine and trimming machine.

Related News


Please send us your requirement by email.

Copyright © Greenergy Refractory and Insulation Material Co.,Ltd All Rights Reserved.